turbo 350 vacuum line diagram sorted by
relevance

Admin18.08.2021

th350 Transmission Vacuum line to intake???

Adjusting the governor weights and springs can be done to adjust the wide-open throttle shift points of the transmission.
76010
Admin12.09.2021

Turbo 350C

I had considered a small rubber section for vibration relief but then I figured that over the length of the line there was plenty of room for flexing.
2604
Admin08.09.2021

Diesel Vacuum system adjustments

Does anybody know which of these ports is for the return line? When you finally get good vacuum regulation to the modulator, you are done.
6802
Admin09.07.2021

GM Full

This will allow you to use those other vacuum ports on the carb for another purpose.
5107
Admin14.07.2021

Cooling lines on turbo 350

If you run an auxiliary mount it where there is airflow and locate it where it can't get damaged.
6607
Admin11.08.2021

Cooling lines on turbo 350

The simple fact that this transmission had an extra gear compared to its predecessor is an advantage from the start.
48010
Admin26.06.2021

Turbo 350C

If there is a lot of repetitive flexing copper lines can get hard and brittle and could possibly fail on you.
3101
Admin06.09.2021

Automatic Transmission Vacuum Lines

It tells the transmission what kind of load is being put on it, allowing the transmission to react with the proper line pressures and shift points.
Admin22.09.2021

th350 Transmission Vacuum line to intake???

One of the weaknesses noted about this transmission was wobble of the direct clutch drum.
3309
Admin18.07.2021

Turbo 350 Transmission (TH350): Specs and Parts Guide

If you remove those two bolts.
38010